Hardware Recommendations

While we still support the original Arduino (we may end that support in the future), we mostly recommend the WiFi enabled ESP32 based boards plus the Pi Pico series.

TL;DR – Our top recommendation is to use the Seeed Studio Xiao ESP32 S3 in combination with the Grove OLED expansion board. You’ll also want to get some Grove sensors (like a knob), and some actuators (like an LED or servo).

Xiao ESP32 S3 microcontroller plugged into the Xiao OLED expander board with a WiFi antenna and LIPO battery

Microcontrollers


XIAO ESP32 S3 – Advantages compared to C6

  • CIRCUITPY drive
  • Faster
  • More memory 
  • Capable of hosting a camera
  • Has a microphone

XIAO ESP32 C6 – Advantages compared to S3

  • Batter wireless – WiFi 6, modern BLE
  • Lower power consumption 
  • Matter-over-Thread support

We also have tested the Pi Pico W and will soon be testing and adding the Pi Pico 2WH to the devices we support

Grove Expansion Boards


Seeed Studio Grove Base for XIAO – 8 grove connectors

  • More grove connections
  • Smaller
  • Better WiFi because of oled interference 

Seeed Studio Expansion Board Base for XIAO with Grove OLED – 4 grove connectors

  • Battery connector
  • OLED display 
  • Bigger reset button
  • Buzzer
  • Realtime clock (with battery backup)
  • SD drive
  • 5v servo output