The latest version is always on GitHub releases
Older versions at: netlabtoolkit.org/downloads/
v2026.9.2 Release 2026/09/23
New
- Standalone on-device MQTT for CloudIn/CloudOut – CloudIn and CloudOut now run fully standalone on a deployed CircuitPython board, with no computer needed – same as OSCIn/OSCOut. Both directions hardware-verified against Adafruit IO in MQTT mode.
Changes
- AnalogOut: optional LED gamma correction (more panel checkbox + tunable value), works both live and in standalone patches; new widgets default to pin D7
- mDNS is on by default (advertises
ntk-device.local), overridable viaNTK_MDNS_HOSTNAMEin settings.toml, or disabled withNTK_MDNS_HOSTNAME = "none" - New widgets default to a Network device at
ntk-device.localinstead of Serial/auto - Unclaimed digital pins now default to LOW – A pin with nothing configured for it used to sit in a floating, high-impedance state – reads as an inconsistent “medium” voltage (e.g. an LED at partial brightness) rather than a clean 0V. Every unclaimed pin now defaults to LOW from boot until something actually claims it.
v2026.7.0 Release 2026/09/23
New feature release: deploy a standalone patch to a CircuitPython device directly over WiFi, no USB/Thonny needed.
New: Push/Pull standalone patch
- Push sends the current patch straight to a connected device and restarts it to run immediately – a faster alternative to Export Standalone’s manual copy-the-file-via-Thonny step. Runs the same widget-compatibility check Export Standalone uses, and confirms before overwriting whatever the device currently has saved.
- Pull fetches whatever standalone patch is currently saved on a device and replaces the NTK canvas with it, so you can check exactly what’s running without guessing or keeping a separate file in sync by hand.
- Both work without any widget already wired up – point the Add Widgets panel’s Device picker at the board and click Push or Pull directly, the same way Monitor Device already does.
- Erase: pushing an empty canvas removes the device’s standalone patch entirely (with its own explicit confirmation), rather than leaving behind an inert one.
- See the standalone patch export documentation for the full walkthrough.
Fixed
- Removed the “Edit ON/OFF” (Run on Server) button – a leftover multi-client/remote-access toggle nothing currently uses, and one less button cluttering the Settings drawer.
v2026.6.2 Release 2026/09/23
Bug-fix release: a major, previously-undetected, app-wide data-binding bug, plus two related follow-on fixes, plus two small firmware diagnostics improvements.
Fixed
- Editing any two-way-bound field could silently fail to save, if the old and new values shared a leading digit sequence (for example, any two IP addresses on the same local network almost always do). The shared rivets/Backbone data-binding adapter used by every editable field in the app compared values with
parseInt(), which stops at the first non-digit character, so192.168.0.118and192.168.0.145compared as identical and the edit was dropped. Root-caused via a DOM-level trace showing the browser register the new value correctly while the underlying model silently never updated. This affected editing a hardware widget’s IP address specifically, but the bug itself was global – any field could have been affected. - DigitalOut/Servo could fail to reconnect after re-enabling them (e.g. right after fixing a bad IP address) – the same structural reconnect bug already fixed for AnalogOut in v2026.6.1 was still present in these two widgets.
Firmware
code.pynow prints the bundled NTK app version at boot, when the firmware was deployed as part of a packaged NTK build (a manual/dev deploy has no version to print, and stays silent rather than erroring).- The serial console’s “press ‘v’/’t’/’r'” diagnostic prompts now clarify that most serial console panes are line-buffered and won’t send the keypress until Enter is also pressed – not obvious from the prompt alone.
These firmware changes are new since v2026.6.1’s actual shipped build (that release’s zip asset was updated in place shortly before these landed) – update your board’s firmware from this release’s CircuitPython/ folder to get them.
v2026.6.1 Release 2026/09/22
Bug-fix release for Monitor Device and standalone patch execution, both introduced in v2026.6.0 — all hardware-verified.
Fixed
- Monitor Device could silently break a normal (non-monitoring) connection to the same device — the device’s monitor-mode detection read bytes off a freshly-accepted connection to check for a monitor request, and discarded them if it wasn’t one, desyncing that connection’s Firmata byte stream from the very first read. Every widget on that connection stopped working until it disconnected and reconnected.
- Pulse never fired at all when used as a free-running generator (nothing wired into its own
ininlet) — the on-device standalone interpreter’s port defaulted to “not firing” and needed an explicit trigger, the opposite of how the real widget behaves. - Monitor Device’s value updates could feel uneven — switched from a drift-prone “elapsed since last push” timer to a fixed-cadence schedule.
- Clicking Monitor Device while NTK already had a normal connection to the same device silently failed — the device only accepts one connection at a time, so the monitor connection sat unaccepted with no error or indication anything was wrong.
- NTK stopped driving hardware after switching Monitor Device off — nothing re-established the connection, so every widget on that device just went idle.
- AnalogOut/DigitalOut/Servo only ever sent one value to hardware, not ongoing changes — a continuously changing source (like a free-running Pulse) updated the widget’s own on-screen display correctly but the physical pin only reflected the very first value, deeper general bug found while fixing the item above.
- Clearing or replacing the whole patch left a hardware connection open — unlike removing a single widget, Clear Patch and Import never released a device connection nothing referenced anymore; it stayed connected (status LED stuck “controlled”) until the app fully quit.
Improved
- Standalone patch’s status LED now has 3 distinct patterns: a single pulse per second while running on its own, two quick pulses while a Monitor Device connection is watching, and solid-on when a normal client is in control — readable at a glance without the serial console.
v2026.6.0 Release 2026/09/21
Added
- Standalone patch execution — a patch can now be exported to run directly on a CircuitPython device’s own on-device interpreter, with no host computer or NTK connection required once deployed. Includes a compatibility checker that clearly names any widget the on-device interpreter doesn’t support yet, rather than silently failing.
- Monitor Device — a new toolbar button lets NTK watch a running standalone patch’s live values (including GroveSensor readings) without taking control away from the device, shown via a banner across the top of the app. Read-only by design: NTK’s own patch-editing actions (add/remove a widget, wire/unwire a cable, load or clear a patch, edit a “more panel” tuning field) are blocked with a warning while monitoring, since the device silently ignores any value NTK would otherwise try to push to it during this mode.
Fixed
- A severe on-device WiFi reliability regression traced to the standalone interpreter being imported as raw
.pysource — on-device compilation fragmented the heap badly enough to degrade WiFi. Now deployed as pre-compiled.mpybytecode instead, alongside a CircuitPython 10.3.1 upgrade and a loosened tick-loop poll interval, both found during the same investigation. - Widget-ID collision after loading a patch and then adding a new widget, which could silently overwrite an existing widget’s wiring.
- DigitalOut defaulting to active on patch load, inconsistent with every other output widget.
- A hardware connection staying open after its last widget went inactive — the server only ever closed it on widget removal, not on deactivation.
v2026.5.4 Release 2026/09/15
Fixed
- Servo (and other network-device outputs) getting permanently stuck at one value after a live input (like AnalogIn) was wired into them. This is the deepest layer of the Servo/network-output saga from the last release: the shared per-device write queue could get jammed by an unrelated widget’s connect-time payload (AnalogIn sends its entire ~28-field attributes object on connect, not just the relevant one) and never recover — every write after that point was silently replaced and dropped, with no error. Hardware-verified now: AnalogIn wired directly into Servo works continuously, not just once.
Improved
- Camera on/off checkbox tooltip on PoseRecog, FaceTrack, and ObjectRecog — replaced an unreliable native tooltip (inconsistent delay, sometimes didn’t show at all) with a fast, dependable CSS-only one, and gave the checkbox itself a larger, easier-to-hit hover target.
v2026.5.3 Release 2026/09/14
Improved
- LLM widget: auto-send is easier to find and safer to leave on. “auto-send on new prompt” moved out of the “advanced” disclosure to right under the prompt box, and now has a settle (ms) field next to it (default 2000ms) — the widget waits that long after the last change (typed or wired in, e.g. from SpeechIn) before actually sending, instead of firing on every partial update.
- LLM widget: model picker. Ollama’s list (whatever you’ve pulled) is now sorted alphabetically. Switching provider and back now restores whichever model you last picked for that provider, and a brand-new LLM widget starts from the last model picked in any LLM widget, not just its own.
- IfThen widget: the inlet readout in Text Input mode no longer shows a frozen “–” no matter what text arrives — it now shows the actual (truncated, hover for full) text, so a wired Text/SpeechIn source visibly updates. The “more” panel’s text-comparison box also no longer overflows its panel.
- Text widget: typing now settles for ~400ms after your last keystroke before pushing a new value out the outlet, instead of firing on every character.
Fixed
- LLM widget: a race where switching provider while a model list was still loading could show one provider’s model names under the other (e.g. Ollama models listed under Anthropic). Also fixed the same corruption self-healing if it had already happened once.
- Servo widget (and Network device output pins generally) not moving. Five separate bugs, hardware-verified against a live XIAO ESP32-C6: a missing explicit board reference on the server’s Servo/PWM output objects, an input/output pin-registration bug that excluded any dual-purpose analog+digital pin from ever being usable as an output, a client-side pin list missing D1/D2, a firmware busy-wait that could starve the watchdog and hard-reset the board under sustained network backpressure (e.g. wiring AnalogIn straight into a Servo/output), and an order-dependence bug where connecting an input widget (like AnalogIn) to a device before an output widget (like Servo) left the output’s pin mapping permanently stuck on an unconfigured placeholder with no error shown.
v2026.5.2 Release 2026/09/11
New
- LLM widget: attach a document. In “more” → ▸ document attachment, click browse to attach a PDF,
.txt, or.mdfile. Its text is pulled out once and rides along with every send from then on — not RAG, just the same full-text injection a typed prompt already gets. Two independent toggles control how it’s used: match its voice & personality, and answer only from it (grounded) — say so rather than guess when the answer isn’t in the document. Picking Summarize with a document attached summarizes the document itself, no typed prompt required. A Show in Finder button reveals the attached file; remove detaches it.
Improved
- LLM widget’s “more” panel is a lot less overwhelming. It had grown to 25+ controls; the least-often-touched groups — traits/purpose/audience, document attachment, and max-tokens/base-URL/auto-send/raw-prompt — are now each behind their own disclosure, closed by default. Bold section headers, a few controls merged or removed (voice+personality into one toggle, the redundant “refresh models” button), and Markdown/length/temperature now share a single compact row.
- Fixed: clicking Send right after typing a prompt (without clicking elsewhere first) could silently fail with “no prompt” — the first click read a stale, not-yet-committed value. Every keystroke now updates the model directly.
v2026.5.1 Release 2026/09/10
Fixed
- Network hardware widgets can’t reconnect after being deleted. Connecting an AnalogIn (or any hardware widget) to a Network device, deleting it, and adding a new one for the same board used to leave the board unreachable until you quit and reopened NTK. Three separate teardown gaps were fixed — the client’s cached device model, the poll timers behind a torn-down connection, and how those readings were routed — which together also caused a briefly-reconnecting widget’s value to flip between the real reading and 0. Verified end to end with a XIAO ESP32‑C6.
Firmware
- CircuitPython Firmata (XIAO ESP32‑C6): on‑board status LED. The board’s user LED (next to the USB connector) now shows what the firmware is doing without a serial console:
- one fast 4‑blink burst — just powered up, code.py is running
- slow steady blink — bringing up WiFi / starting SoftAP
- quick double‑pulse every ~2 s — listening, no NTK client connected yet
- solid on — an NTK client is connected
v2026.5.0 Release 2026/09/09
- New widgets
- ObjectRecog (AI) — trainable webcam object recognizer. MediaPipe ObjectDetector crops to the detected object, ImageEmbedder turns the crop into a feature vector, 1-NN cosine match against recorded examples. Two outlets: match (your trained slot name) and label (the raw COCO class it sees). 5-second recording burst with a “turn the object” hint; “ignore people” and “focus on detected object” toggles.
- Concat (logic) — four string/number inlets joined with a configurable separator (default “, “). Recomputes on any input change, cable connect, or disconnect.
- Renamed
- PoseTrack → PoseRecog — it classifies a pose and fires a match, with no x/y tracking output, so “Track” was misleading. Patches saved through v2026.4.1 still load (back-compat alias); the Add Widgets panel lists it once.
- Improved
- GroveIn — live scaled sensor values now show in the widget body next to each reading label (“Distance 1234”, “X 512 Y 480 Z 600”); the “more” panel pin field defaults to D7 for single-wire sensors (DHT11, Ultrasonic); dropped the never-cleared “error” status.
- Text — the “more” panel text field updates the on-canvas box and outlet on every keystroke instead of only on blur.
- Firmware (XIAO ESP32-C6 CircuitPython Firmata)
- Watchdog + boot escape hatch: recovers from hangs where Ctrl-C / Thonny Stop can’t get the REPL back (20s hardware watchdog, a boot window that drops to REPL on serial input, and a reset-loop guard that bails after 3 watchdog resets).
v2026.4.1 Release 2026/09/08
- LLM widget (Ollama default, personality prompts, random/reset)
- Text widget (Markdown display box, resize, import/export, word stats, show/hide toggle)
- Widget canvas layering (panels/boxes no longer block neighbors, drift fix)
- Full Screen button fix
- Fixed Image widget Width inlet, changed to Scale
v2026.3.1 Release 2026/09/06
- Updated SpeechIn to make it work again. On the Mac it now uses the MacOS built-in transcription capability and operates completely on-computer (no internet required) and does not cost anything.
- Improved SpeechOut to use improved MacOS voices.
- Improved Text to give it an outlet so text is passed through to another widget for example SpeechIn->Text->SpeechOut
v2026.2.2 Release 2026/09/05
Added new sensor to GroveIn widget – Ultrasonic Distance ranger
v2026.2.0 Release 2026/09/02
New widgets
- PoseTrack — trainable webcam pose recognizer: record up to 4 hand or full-body poses for live camera-based recognition, no wearables required. Includes a 3-second “get ready” countdown before each recording burst.
- GroveIn — Grove sensors over WiFi, alongside your existing hardware widgets on the same connection. Four sensors supported: 3-axis accelerometer, time-of-flight distance sensor, temperature & humidity sensor, and a digital light sensor with switchable infrared/full-spectrum/visible-light readings.
Gesture widget overhaul
- Colored live-confidence dots (red → yellow → green → deep green) per slot, shared with PoseTrack’s identical color logic.
- Optional names for trained gestures, a live preview graph of what’s recorded in each slot, and a prominent “which gesture just matched” readout.
- All 4 slots’ match percentages shown at once.
- Recording now auto-trims idle time before/after your actual motion, fixing self-match scores that were previously capped well below 100%.
- Fixed a real, previously-invisible bug: Gesture’s visual feedback (flashing record button, matched/pending colors) had never actually rendered at all until now.
New “AI” category — Gesture, PoseTrack, and FaceTrack now group together in the Add Widgets panel.
CircuitPython WiFi firmware (Seeed XIAO ESP32-C6)
- New SoftAP mode — the board can run its own WiFi network instead of joining a router.
- Grove LCD display support for showing the board’s IP address.
- Quieter, cleaner boot log with one summary line of sensors actually found.
- Calibrated the distance sensor and fixed an out-of-range reading bug.
Fixes
- Exporting/downloading a patch no longer silently overwrites your saved patch, and no longer fails on larger patches.
- Camera-based widgets (PoseTrack/FaceTrack) no longer fail to reconnect after being turned off and back on.
- Fixed DigitalIn’s input mode, a widget auto-placement bug, servo control, and a Network-device bug on Servo/DigitalOut.
- Added a default Device picker to the Add Widgets panel.